Floor Covering Installation

 

The product RESIMARMO - Roll out the marble aggregates

Installation of the product RESIMARMO by three workers of RESIMARMO Italia.

 

Price Installation

 

 

The RESIMARMO® product is composed of two main products,

  • first of all aggregates (or granulates) of marbles 

       then 

  • the RESIFIX marble resin.

They are mixed during laying. They have been carefully selected in order to provide complete security for interior and exterior floors.

RESIFIX is a single component product. It is a liquid elastomeric polyurethane binder, aliphatic, moisture curing and solvent, and finally it is cold-processable. The compound “well dosed” with a natural mineral grain, produces a paste that allows the realization of coatings for floors. The final surface is a compound without fittings, flexible and resistant to cracking. The different tones of the aggregates make it possible to obtain multiple chromatic effects.

RESIMPER is also a single-component, ready-to-use product also applied cold. It is presented in liquid form, in contrast to the hardened state it creates as a continuous pavement membrane. Without joints and overlaps it does not fear moisture.

RESIPRIMER is a bi-adhesive epoxy component in an aqueous dispersion. It is used as a floor preparation for the RESIMARMO® line, also based on polyurethane resin.

RESIPROTEC is a stable and transparent product. It has a high shock performance, similar to a moisture curing component. In addition, the quality of the aliphatic polyurethane resin provides high UV resistance. It is a product for solid and flexible coatings with high resistance to abrasion and wear. In addition it is not sensitive to chemicals, dilute solutions of acids and bases. Finally chlorinated water, salt, fuels and lubricants of all kinds do not disrupt it.

RESITEX

RESITEX is a TNT (thermally bonded geotextile fabric), based on polyester / polyamide synthetic fibers, with high elasticity and high tensile strength.

RESITEX 80

RESITEX has been developed to be applied in situ by the interposition of fresh over and between the different layers of RESIMPER resin, in order to obtain a thickness as homogeneous as possible and consequently an optimal distribution of the product in limiting the effect of leaks.

RESITEX 200

It is recommended for the ultimate abrasion protection and a homogeneous distribution of the unladen weight of the support coated with RESIMPER membranes of highly elastic polyurethane. Ideal in situations that require additional armor protection, or protection and optimum thickness distribution, with minimal loss of mechanical properties.

Product compatible with solvents and strong absorption. Flexible and adaptable to uneven surfaces, edges and corners, critical points of lifting and overlaps of old bituminous membranes, Ideal to assemble junction points between interdependent media or a different type or different material, cracks and macro- cracks, joints and cuts, etc …
High elasticity, in order to maintain as much as possible the mechanical properties of the membranes, which increases its resistance to perforation and perforation due to plant roots.
Inner and outer edges, front reinforcement, backbones and other singular points or as a “weed control” system prior to installation of the RESIMARMO® system.

RESITEX 200 membrane protection RESIMPER for layering of: concrete tiles, wood, wood panels, composite materials, cement boards, floating floors, etc …

 

Technical certifications obtained

  • ETA : European Technical Assessment document Nº 06/0263 – CE marking : 10 and 25 years.
  • Flat roof external fire exposure Nº 06/32301345
  • Roof 45º fire resistance Nº 08/32309237
  • Root perforation no RESIMPER Nº 07/32305556 with RESIMPER Nº 07/32305557
  • Abrasion Taber Nº 10/101.729-1626
  • QUALICONSULT : Notebook of Technical Terms CCT nº 50 712 004 096 MS
  • BBA : British Board of Agreement 11/4836
  • IETcc report 19.221-II (2007) on thermal resistance.

 

Technical certifications obtained

 

 

URGENT APPEAL: We need distributors to cover different sectors available in United States. If you are interested, join us. Fill out the form below and become our exclusive partner in your state.

 

TO BECOME PARTNER

Form to Become a RESIMARMO Partner.
  • This field is for validation purposes and should be left unchanged.

 

 

The product RESIMARMO - Logo of colors