RESIFIX

RESIFIX

 

Beaches of pool with reasons

Beaches of pool with reasons.

RESIFIX

The RESIFIX resin is a compound binder of polyuréthane, liquid elastomer, aliphatiques, even hardening to the humidity, solvent, calm to cold weather. The product “measured out” well with aggregates of marble, produces a flexible dough that permits to achieve coatings of soils as inside as outside. There is not an ungainly joint, the surface is flexible, non-skid and permits an excellent draining. The different hues of marble used offer the possibility to get multiple effects of color, the geometric motives, the strips or the changes of coloration in a same surface.

 

Resin pot RESIFIX

Resin pot RESIFIX.

 

 

RESIFIX-Page-1

RESIFIX-Page-2

 

REQUIREMENTS OF SUPPORT

RESIFIX has a good cohesion and a good resistance to the compression, he lands on soils without dirty humidity or ascents of humidity.
The support must be clean and dry, it must be exempt of traces of oil, of grease, of wax, milt of cement, or of all something else that could compromise a good adhesion of the compound.
Of the temperature of the substratum must be consisted between 10ºC and 25ºC.
For the new tiles of concrete freshly streams, you should wait for at least 21 days before applying the product.

The surface to be treated must have the following minimum mechanical strength:

  • Minimum cohesion 1.5 MPa.
  • Compressive strength: greater than 25 MPa.

The substrate must be free from water or water vapor pressure (max. 4%).
The surface must be clean, dry and free of friable or little adhesion. It must also be free of oil, grease, wax, or any substance that can affect adhesion.
For more information on the treatment of singular points, contact our technical department.
The delimitation of the application space can be ensured by means of an aluminum profile previously fixed on the support.
The substrate temperature must be between 10ºC and 25ºC.
If there is a suspicion of moisture in the substrate, a suitable primer (RESIPRIMER) should be used.
on new concrete or mortar, wait at least 21 days before applying the RESIMARMO® system.

ATMOSPHERIC CONDITIONS

It is preferable that the ambient temperature is between +10 and + 30ºC. The relative humidity of the air between 30% and 80%
DOSAGE
The dosage of the mixture of RESIFIX with the aggregates is as follows:

AggregatsRESIFIX
AggregatsRESIFIX
Non-porous regular3 à 5 %
Irregular porous5 à 7 %

Technical certifications obtained

  • ETA : European Technical Assessment document Nº 06/0263 – CE marking : 10 and 25 years.
  • Flat roof external fire exposure Nº 06/32301345
  • Roof 45º fire resistance Nº 08/32309237
  • Root perforation no RESIMPER Nº 07/32305556 with RESIMPER Nº 07/32305557
  • Abrasion Taber Nº 10/101.729-1626
  • QUALICONSULT : Notebook of Technical Terms CCT nº 50 712 004 096 MS
  • BBA : British Board of Agreement 11/4836
  • IETcc report 19.221-II (2007) on thermal resistance.

 

Technical certifications obtained

 

 

 

Logo-RESIMARMO