Techniques

The techniques

 

 

The techniques - Installation of RESIMARMO on the pavement of an Italian house

Installation of RESIMARMO on the pavement of an Italian house.

 

 

The techniques RESIMARMO

The techniques of preparation of the support:

Different techniques for preparing the support can be envisaged according to its state, such as for example:

  • Chemical stripping,
  • Mechanical cleaning,
  • Scarification,
  • Sandblasting,
  • High pressure cleaning,
  • Thermal stripping.

The techniques of poses

The general condition of the substrate determines the most suitable techniques to use.

  • Troweling,
  • Fixing to the trowel,
  • Pose to the rule,
  • Installation with guides,
  • Final finishing by hand,
  • Final machine finishing,
  • Final surfacing with the electric helicopter,

 

The techniques for stable supports

How do we do it ? How to apply the right techniques ?

  1. Make a lean or
  2. Make a reinforced concrete screed.
  3. Make a patch,

Different RESIMARMO® products are used.

 

The techniques - All useful material for a team of three workers

All useful material for a team of three workers.

RESIPRIMER (adhesion primer, it allows to favor adhesion to the support).

RESIFIX (single component polyurethane resin, mixed with marble aggregate, creates the RESIMARMO® compound which can be applied to a rigid and solid surface).
RESIMPER (solves problems related to poor sealing).
RESIPROTEC (polyurethane resin, it constitutes the finishing step in the case of use with an intense passage).
RESITEX is a geotextile used to reinforce the soil on which RESIMARMO® is applied
The profiles define the area of ​​application of RESIMARMO® and serve as a reference in order to guarantee a constant coating thickness. It is advisable to use anodised aluminum profiles. The thickness of the profiles can be between 8 and 15 mm.
The greater the surface irregularity, the thicker the profile. They will be cut to the exact measurement to obtain a high quality end result, which also includes the cutting of the angles at 45 °. So much for the curbing techniques.

To fix the profiles, a hot glue gun is the most suitable method. The glue gun is an electric tool used to melt and apply hot-melt glue into sticks. A trigger advances the glue stick as it melts. This method of sizing is to be preferred because once applied, the adhesive solidifies quickly. Thanks to its fast setting, it allows to correct the variations in the level of the support, on which RESIMARMO® will be applied.

You will see more precisely the different phases of work for the installation of the RESIMARMO® product here.

Do not hesitate to try the adventure yourself, you will be accompanied throughout your production, by a paper documentation and explanatory and explicit videos. In addition you can always contact us urgently for advice at the following number:

 

The techniques - Phone-number-00 33 980 816 844

 

Or by e-mail at the following address:

technical.service@resimarmo.com

 

Good achievement and success of your project. Accompanied by our services, we wish you every success!

The whole team of RESIMARMO® USA.

 

 

 

The techniques - LOGO-RESIMARMO des couleurs